A beautiful deck adds to the beauty of a great backyard. The deck can be used for any kind of social or family gathering, to enjoy a barbeque and fire pits as per your climate. If you have such a place and have already decided that you will install one deck, then you probably have made the best decision regarding the utility, as well as the decoration of your house. Now you might be wondering about the labor costs to build a deck. Well, this varies due to various reasons, starting from the material of the deck to be used, to the number of accessories you are going to add to your deck.
Estimated cost to build a deck
As mentioned earlier, it is not possible to figure out the exact amount regarding the construction of a deck, still, you can get a rough idea to start the work.
A typical 80 square foot area will cost you around 1500 dollars to 3000 dollars, subject to various equipment used in the process. Similarly, if you want to have a deck of 100 square feet, then the budget may vary from 2000 dollars to 3500 dollars. Similarly, the price will go up based on if you keep on increasing the size of the deck.
Labor costs to build a deck
Apart from the items, materials, and accessories, the major cost that is involved here, is the labor cost. It comprises a good amount of the total cost. In general, the labor cost for building a deck ranges from 10 dollars to 20 dollars per square foot, depending on various factors. For example, if your deck is a big size or you want to use special materials in your deck, then the labor cost will go up. It also depends on the condition of that particular area as well as on additional features like stairs, built-in seating, etc.
Factors in calculating the cost of building a deck
Primarily, the cost of building a deck depends largely on the size as well as on the complexity of the deck. If you want to build a two-story deck, then obviously the cost will increase. Further, design style, material, and foundation requirements also contribute to cost.
Costs one by one:
The average cost of material in developing a deck happens to be in the range of 20 dollars to 50 dollars per square foot. You can choose from three major types of materials – wood, plastic, and composite. A pressure-treated wood deck can cost around 15 to 20 dollars per square foot. In most cases, pressure-treated wood is used nowadays to build the decks. Fabrication is done on the wood to fight against insects and other risky elements.
If you want to have a complete wood deck, then obviously it will cost more. Wood decks are not only attractive in look, but also popular due to their durability. You need to maintain it with regular cleaning, but it always adds an aesthetic value to your house. You can use bamboo, cedar or redwood or even tigerwood, to build your deck based on your capability. Out of all, bamboo decks are the most cost-effective, while tigerwood is the most expensive one.
Talking about material, apart from wood, there are plastic and composite decks. You need to spend between 30 to 40 dollars per square foot for these and you can choose Trex decking also, which has become popular very recently as an alternative to wood.
The size of the deck contributes a lot when it comes to calculating the estimated cost of the deck. Labor cost to build a deck also depends largely on the size of the deck you are installing. If the deck is of a small 10×10 size, then you need less material. The labor charge will be less due to the smaller area. But, if you are planning for a big 16 feet by 20 feet deck, then obviously you need more material and time. The labor charge will increase accordingly.
Type and Design
The design of a deck is equally important. If you choose complex designs including railing, multiple levels, additional stories, and other things, then your labor and overall cost will increase accordingly.
You need a good foundation for your deck. This is especially true if you plan to put on additional weight, in the form of a hot tub, then the structure should be different. The concrete footings must be very strong and in the case of raised decks, you need to have additional beams for security. But if you plan to have small decks attached to your home, then the cost will be much less.
Additional Cost & Special Considerations
Once you start working, many additional costs can come up one by one. It can be in the form of deck skirting or even a roof. Let’s check those possibilities:
Demolition of Existing Deck
If you already have a deck that is beyond repair or repairing it will cost more than the new one, then it is always advisable to demolish it. In some cases, the base may be reused but whatever work you perform on the existing one, it will be a costly affair. The labor charge will go up based on the additional assignments.
If you have a raised deck, then skirting is the best way to cover up the space. You can use materials like metal, wood, lattice, or even vinyl sheet to develop the skirting. Stone veneer will be the costliest affair, whereas lattice is economical. Based on the material you used in deck skirting as well as depending on size and complexity, labor charges will vary accordingly.
This is all about labor costs to build a deck. As mentioned earlier, the exact amount can’t be calculated unless the material, size, design, and accessories are finalized. But, overall, the labor charge contributes a good amount, next to materials and accessories. You need to find the best person who can build your deck, while also taking into consideration all safety and security measures.
Differences before and after kitchen renovation
Waterproofing your deck might seem like an overwhelming job to many. However, it is a crucial part of maintaining your property and taking care of your home.
Luckily, if you know what you are doing and how to get it done, it doesn’t have to be such a stressful task.
In this article, we are going to give you step-by-step instructions on how to properly waterproof your deck using professional techniques. We’ll also explain the benefits of doing it right.
***Homelierpro.com gets commissions for purchases made through links in this post. View our disclaimer***
How to Waterproof Your Deck (The Right Way!)
Waterproofing your deck is extremely important for many reasons. You want to make sure you take the time to do it the right way and with the best techniques, tools, and materials available.
That is why we have prepared a step-by-step guide to help you get your decking job done right the first time around.
How to Waterproof Your Deck
Follow these instructions for a waterproof deck that will last a long time and be able to withstand some of the harshest outdoor weather conditions.
What You Need:
- Stain with your color of choice
- Waterproof sealant
- Garden hose or a power washer
- Paint roller
- Thin stick
- Deck cleaner
- Rubber gloves
- Safety glasses
Step 1 – Inspect Your Deck
Before you add any paint, stain, or sealer on your deck – whether it’s a wooden deck or any other sort of deck surface – you want to first make sure it is safe and solid. You never want to put the time and effort into waterproofing a deck that is warping or is going to require repairs.
If you have decking boards that are rotting due to water saturation, growing mold or mildew, or starting to splinter, you should replace them before adding your product.
Step 2 – Prepare Your Space
Next, prepare the deck before adding any stain or formula. This will require a little elbow grease; grab your safety glasses and a bottle of water for this job.
First, pull out your sander and remove any old remaining stain or paint. This is very important because it will show through the new coating. You will need to sand the entire deck to eliminate splinting wood and revitalize the old wood for better absorption.
Step 3 – Rinse the Deck Off
Now it is time to grab the hose and spray away all of the dust, dirt, and debris. Grab a scraping tool if you need to remove any stuck-on gunk, mold, or sap.
There are deck cleaners available if you find yourself struggling to clean the wood.
Allow your deck time to dry – about 24 hours – before moving on to the next step. (If you do not give your deck enough time to dry, the sealant will not cure properly.)
Step 4 – Apply Your Waterproof Material
With a paint roller or paintbrush, apply an even coating of your sealer or stain to the wooden parts of your deck. Grab your headphones and put on your favorite music or podcast because it might take some time.
Once you are finished with the first coat, let it dry for up to 10 hours, depending on the product’s instructions.
Next, sand down the deck once more, provide a waterproof barrier in the wood, then apply another coating of stain or sealant.
After two or three coats, your deck should be just about complete. Let it cure for up to 48 hours before you reset your furniture or open it up to frequent use.
Why Should You Waterproof Your Deck?
Now that you know how to waterproof your deck, do you know why it is so important to do so? Obviously, we do it to keep water from seeping into our decks, but there are very important risks at play.
1. Extends the Life of Your Deck
When your deck is exposed to any type of moisture for long periods of time, that liquid will build up inside the wood and cause it to rot, break, and bow. This will lead to expensive repairs and might even require an entire deck replacement.
2. Fights the Elements
No matter where you live, chances are good ol’ mother nature provides you with plenty of water forms throughout the seasons, whether it is rain, snow, or ice.
If your deck is prepared before the weather comes, chances are good the weather won’t make any impact at all on the wood.
Even in a torrential downpour or through a record-breaking blizzard, once the snow melts and the water dries up, your porch will still be intact.
3. Increases Curb Appeal
Not only does waterproofing keep water from absorbing into the wood of your deck, but it also keeps the color from fading.
When you properly waterproof your deck, you are going to have a beautiful porch that all your neighbors will envy.
4. Increases Your Deck’s Durability
Waterproofing your deck is going to help increase its durability and make it a safer, more sound platform. This will also keep it from splitting and scuffing.
5. Eliminates Mold and Mildew Build-up
Any type of wood that isn’t treated has the ability to develop mold and mildew build-up, which will happen if the deck is frequently exposed to water.
Mold and mildew will stain your deck and make it look awful, as well as ruin the wood and cause it to crack and break.
To add to the damage, mold and mildew can create some serious health concerns, especially for those who are sensitive to mold spores or have allergies.
6. Protects Your Deck From the Sun’s Harmful Rays
Adding a waterproof seal to your porch will add a layer of protection from harmful UV rays that are known to discolor, break down, or stain your wood.
7. Helps Prevents Scuffs and Scratches
Another benefit of waterproof products is their ability to help keep scuffing and scratches to a minimum. These formulas help protect the wood and make it more difficult to ding up.
8. Saves The Wood From Insect Activity
Insects are a huge issue when it comes to damaging or invading wood, porches, and homes. When you add a layer of waterproof protection to your deck, insects will be discouraged from coming near the area.
These types of sealants will also make it nearly impossible for any type of insect to infiltrate, including the dreaded termites.
Things to Consider When Waterproofing Your Deck
Waterproofing your porch may seem very straightforward, and for the most part, it is. However, there are a few things you need to keep in mind before taking on such a big outdoor job if you decide to go the DIY route.
The process of waterproofing your deck can be dangerous, especially when you don’t take the proper precautions. Make sure to keep your safety glasses on when required, and remember that a lot of the products you use are strong chemicals and can cause irritation, rashes, or other reactions on your skin.
If you have asthma or plan on doing a lot of sanding, you may want to consider wearing a mask to protect your lungs while you work.
Also, keep an eye on your electrical tools and cords. You’ll want to avoid electrocution, tripping, and accidentally cutting wires.
Know What You’re Using
Before choosing a waterproof material, take the time to do a little research and make sure the option you use is the best product for your situation.
Know the difference between sealants, paints, and stains, and decide which one will work the best for you.
Protect Your Yard and Plants
Waterproof materials are chemicals that can cause severe damage to your grass and plants. If you are working anywhere near foliage, cover it up with a tarp, drop cloth, old sheets, or towels.
Watch the Weather
While waterproofing your deck is going to protect your wood once it is completed, it isn’t going to work until it is cured.
Because this process takes a few days, make sure the forecast for outside isn’t calling for any rain and the temperature isn’t going to skyrocket. If it gets too hot, the sealant will begin to evaporate before it can absorb into the wood. If it is raining out, it will not cure properly, and it won’t create the seal you are looking for.
Call a Professional
If you find you don’t have the time or aren’t sure you can handle such a large project on your own, feel free to give a local professional a call.
There is no shame in letting someone who is experienced in this type of work take over, and doing it this way will give you peace of mind knowing the job is done right.
Also Check out-
Top 10 Backyard Gazebo Ideas Create a Relaxing Backyard Retreat
A deck in your backyard is a great addition to your home, as it will give an attractive focal point to your background, while also creating a wonderful space for fun and entertainment. The process of installation deck can be done either directly by following DIY steps or you can go for a professional.
A deck should always be a place for relaxation and fun, so if you are planning to build a deck, then it should not come with a high maintenance cost. So, in this article, we have listed everything which is related to the installation of a deck attached to your home.
Types of materials for installation deck
When it comes to the installation deck, choosing the right material is the most important decision. You need to know the pros and cons of the material and how well it should be maintained. So, we have listed a few deck materials that you can consider.
The pressure-treated pine is the most cost-effective option and is relatively strong and easy to work with. If you use the material with proper care and maintenance, then this material will last for many seasons.
If you are looking for beautiful color, then redwood will be the best option. This is a highly-durable wood, so it will withstand any kind of wear, but it’s slightly expensive.
Cypress is an expensive decking material and it is considered an exotic wood. It will resist rot, mold, and insect infestation.
Cedar is a lightweight and durable material, and it doesn’t decay like other wood materials. But you need to apply a sealer to maintain the beauty of the wood.
Teak is the most preferred choice for outdoor decking and it is a super-strong and durable material. But it requires the frequent maintenance of cleaning and sweeping.
Wood or plastic composites
Composites are a mixture of wood and plastic fibers, and it is a strong and easy to handle material. It will come in under your budget, but the color and options are limited.
The vinyl has been designed to look exactly like real wood and even it has a stamped texture. It is lightweight and easy to assemble.
How to install a deck?
Once you are done selecting the right material for the deck, then the next step is to know the process for the installation deck.
Plan the deck design
Here, you need to choose the deck material and you also need to decide the size and shape of your deck. Whether you are planning for a new deck or remodeling an old deck, the size and shape will play a major role. It can be decided depending on the space available, the function of the deck, and the architectural style of the house.
Choose the best substructure
The substructure is the frame of the deck and it is made up of joists, beams, posts, and footings. If you live in a cold or four-seasons climate then choose frost-proof footings. If you built a deck over an existing one, then it should not have any issues like mold, loose fasteners, damaged joints, or an insecure ledger board.
Dig holes for posts
Depending on the requirements and soil conditions, the location and number of deck footings can be decided. Initially, you need to dig holes using a power auger or digger and make sure all the piers are of the same height.
The next step is to pour the concrete into all the tubing forms and place an anchor bolt in the center of the footer before the concrete gets hardened. Once the concrete has been cured, set the post bases over each anchor bolt and align accordingly.
Set the posts in the post base and attach them using a screw or hardware nails. After this, attach the beam to the post base following the same process. Check the beam alignment and if needed make any adjustments.
Attach rim joists
Once the posts and beams are in the right place, you need to build a deck frame. The deck is free-standing, so it doesn’t require any ledger board. But depending on the deck’s perimeter, it will be filled with joists and it supports the decking system.
Attach inner joists
Once you are done with placing the joists in the deck’s rim, you need to install the joist with the help of hangers at a proper height. If you are installing the joist between the beams, then install the joist hangers first. Install the joist hanger using structural nails or screws, and use self-adhesive flashing tape to prolong its life.
Install the deck board
Finally, you can install the deck board and the process may vary depending on the deck material and fastener choice. If your deck is free-standing against the house then the boards will run parallel to the house and if it is in the yard, then it will run parallel to the decking frame. Install the decking board with the help of a fastener.
Trim the board
Once the boards are in their place, you need to trim the board in a straight line. Using a circular saw, you can cut the board along the line and ensure to make a precise cut.
If you want to enhance the performance of the deck, then it should be taken care of properly. Before installation of the deck, apply a coat of repellant all over the surface of the deck and you can even use corrosion-resistant screws during the fastening process. Treat them with a good brushing of water repellant every year and more maintenance will enhance the longevity of the product.
You can find different types of materials for the installation deck, but before choosing any material, you need to check the level of maintenance it involves. When it comes to building the deck, the cost, maintenance, and durability will play a major role. If you have a clear idea of the decking materials, then you can easily finish the installation process.
All about Master Bathroom Remodeling Cost
Once a deck has started to be exposed to the weather for some time, colors will start fading. This is a very common phenomenon. The grain gradually gets washed out and the original timber will not look as good as it did originally. When such a situation arises, then you’ll need to know how to re-stain a deck. For any kind of stains, it is ideal to follow this practice once a year or for two years. To re-stain the deck, you’ll need to make sure you clean your deck very well, before the start of any maintenance activities.
Steps To Re-Stain Your Deck
So, finally, you are ready to exercise the re-stain activities on your deck. With a retouch, it will look like a brand new one and your mind will be refreshed seeing the newly done deck. A very good cleaning on the surface and a fresh coat of deck oil will increase the life of your deck timber. Here are the steps regarding how to re-stain a deck.
- Deck oil
- Deck cleaner
- Exterior paint, preferably black
- Plastic sheet
- Stiff broom
- Lambswool applicator
Step By Step Approach Of How To Re-Stain A Deck:
You need to cover all the plants near the deck with plastic. This is done to protect the plants while you start the cleaning activities. Also, you need to protect any sort of paintwork from the deck cleaner, or else it might be damaged. You also have to hose off the deck to remove any dirt from the surface.
You have to mix deck cleaner and water in a ratio of 4:1 in a bucket. The next process is to scrub the timbers of the deck by using a stiff broom. It will help you to remove all the stains from your deck. Now, leave the deck cleaner on the deck for 15-20 minutes depending on the amount of stain you already have. Keep it wet. In the meantime, you must also scrub the handrail by wearing a glove. You should take all preventive measures while applying deck cleaning solutions like wearing gloves to avoid any contact directly with your skin.
You can use a pressure washer for cleaning the deck and handrail. With the force applied, dirt can be removed from each board present on your deck, but you have to be patient and need to apply the same to every corner of your deck. Only then will the entire deck look like a new one. Make sure you get off any extra water and give the deck enough time to dry completely.
Use a paintbrush for the surface and a lambswool applicator for applying deck oil. It’s better to work with a few boards at a time when applying deck oil. Gradually, the entire deck will be covered. It’s better to apply two coats of deck oil to make the deck look better. Just be sure to give adequate time in between coats to dry.
Black paint can be applied to deck posts. You can paint the same using a regular paintbrush. As a preventive measure, you can keep a piece of cloth with you to wipe any extra paint outside the deck posts. Let it dry for a good amount of time.
Apply a coat of deck oil to the handrails also. It will shine like never before. Let it dry also.
Tips and tricks on how to re-stain a deck
To re-stain a deck, there are lots of things that you can do for the betterment of your deck. No matter what type of deck you are using, these tips will help you to keep them looking great for years into the future.
If the timber of the deck is in better condition and it has just become grey in some areas, then you can use a good quality deck cleaning product to clean it. This will help you to remove the weathered wood fibers, tans, or any oils. Your deck will shine with its natural color. One piece of information, if you have such badly weathered timber, then it should be sanded back to a solid surface before you start the cleaning activities.
Earlier Stained or Oiled Timber
If you already have an old coating, then you need to remove that also, to apply newer coats. To do it, you can use the trusted method of water bed test. Just sprinkle some water on the deck and wait for a couple minutes. If the water still beads, then you can be sure that this timber will not be able to accept any kind of new coating under any circumstances. So, you have to sand it off before starting the entire cleaning process of the deck.
If you already have a painted timber deck, then the re-coating of paint should be followed as per standard instructions. You need to remove any loose paint or the loose areas. You can apply light sandpaper to clean it before repainting. If you need to change the entire color, then you need to remove the paint either by sanding or by stripping it, before you apply the new stain or oil.
How to choose Deck Finish
Well, this is another important aspect of how to re-stain a deck. There are three main options available to decide on when choosing which type of finish you want to apply to your deck.
If you intend to preserve the present timber color, then natural oil is the best thing to use. Its semi-transparent finish will give your deck a completely new look.
Stain is particularly useful if you plan to change the color of the deck. You can apply any color of your choice and it will look nice if applied properly and evenly all over the deck
You can use paint in case you already have a painted surface. There are special deck paints available to help your deck look like a vibrant one.
With all these features, options, tips, and tricks, you can get an answer on how to re-stain a deck. Start it now.
Want to do plumbing in the bathroom? Here are some tips
In the construction industry, there remains a requirement for a composite floor system or even a built-up roof system. A metal deck is used as a structural element to support such roof systems. Also, it covers all types of steel sheet profiles with concrete for creating the same. This is one of the most important areas in the construction segment and the metal deck holds immense importance in that.
Usage of A Metal Deck
Metal decking is used both in floor and roof construction, due to its quality to build robust construction. Let’s check both, one by one.
The Metal Deck in Floor Construction
Instead of using a traditional framework with props, metal decking can be used with a steel frame and a concrete slab, to produce cost-effective, as well as lightweight floors. Metal decking is particularly helpful for multi-story steel-based constructions where it gives an effective solution in terms of stability and solidarity. There is no need to use metal decking as a part of the composite floor system. It can easily create a permanent framework for concrete slabs by avoiding traditional methods.
Uses of Metal Decking in Floors
- The metal deck creates a working platform to build multi-stories
- It stabilizes the frame of any building
- A metal deck supports any concrete structure with its robustness
- Metal decks are used in composite floor deck systems, to carry loads of any building
- It is used in mezzanine segments, those are also covered with concrete
Benefits of Metal Deck Floor Systems
- The entire installation process is very fast and which helps with complex steel layouts, by reducing overall time and cost
- The metal deck acts as a safe working platform to facilitate the trades instantly, once the installation is over
- An overall reduction in load on the frame and foundation is observed, once a metal deck is used. It decreases the self-weight of slabs also. Ultimately, it is also responsible for an overall reduction in materials
- Tensile reinforcement of the slab is increased with the use of a metal deck in the construction
Profile & Type of Metal Floor Decking
There are three types of metal decking profiles that are generally used – 1.5”, 2”, and 3” deep ones. The main difference between these three lies in the strength of the panels. The deeper the panel becomes, the stronger it becomes. So, a 3-inch floor deck is quite stronger than any 1.5-inch floor deck.
Here are some examples:
B-36 Formlok – B-36 can accommodate 7.5” high and 3.5” deep. It is normally used in short-span conditions where required. In terms of weight, the entire floor deck is available from 22 gauge to 16 gauge where 16 gauge is the highest one.
W2-36 Formlok – We-36 is a bit stronger than B-36 which can manage slabs of 4’ deep and 8’ high. It is also available in light and heavy gauge modes.
W3-36 Formlok – The best one, which accommodates slabs 9’ high and 5” deep. It is the strongest metal floor deck of the three. A W3-36 formlok is 36” wide and 3” deep.
The Metal Deck in Roof Construction
Apart from flooring, the metal deck is a popular option when it comes to solid roof construction. It supports various types of roofing systems, like double skin built-up systems or standing seam systems or even single-ply membrane ones. It is also very effective in green roof concepts. The metal deck creates the structural platform for other materials, rather than forming the actual roof finishing.
Uses for Metal Roof Decking
- It supports the roof system of any building with robustness
- It can be used on mezzanine floors which are generally covered with plywood
- The metal deck is used in steel canopies to also provide safe shelter to people
Benefits of Metal Deck Roof Systems
- Durability is very high
- Metal deck roof systems are easy to install and cost-effective
- It acts as an insulator against heat and noise
- Metal decking systems hardly needs any support systems to function in the long run
- It gives a clean and uncluttered appearance where required
- Can act as a diaphragm for transferring wind loads from perimeter elevations to vertical walls, present inside. Thus, it reduces the requirement of in-plane roof bracing, so that it can enhance the beauty of an uncluttered soffit.
Profiles & Types of Metal Roof Decking
In metal roof decking, there are various types like B Deck, N Deck, HSN3 Deck, A Deck, and F Deck. Out of all, B Deck and N Deck are the most popular, although others also have enough significance in roof construction.
B Deck – B Deck is the most common type of metal deck used on the roof. Its main usage is to support a built-up roof system. If you have a span of fewer than ten feet, then B Deck is normally used. Like other decks, it is also available in 22 gauge and 16 gauge.
N Deck – If you have a long span condition of more than ten feet, then N Deck is used. Like B Deck, it also comes with 22 gauge and 16 gauge support. It is 24” wide and 3” deep.
HSN3 Deck – This is a new block in the industry. Although it has enough similarities with N Deck, there are two most important differences observed by the experts. One is, that HSN3 needs less time to install due to its 32” width. Second, the angle in ribs is different from N Deck, which is used in long-span conditions of more than ten feet.
A Deck – A Deck panels are 1.25” deep and 36” wide, an older format of metal roof decking. It is also called a narrow rib due to the 1” spacing in between. Due to this, it is weak and mainly used in patchwork or in repairing old buildings.
F Deck – It is a better version of A Deck, but narrower than B Deck. It offers better strength than A Deck and is mostly used in older buildings where F Deck panels are already in use.
That’s everything about the metal deck. It forms the most important part of any construction, be it on the floor or roof.
Garage Floor Coatings – Why You Need it
You will find a lot of ideas for outfitting an outdoor space, but the first thing that strikes many peoples minds is hot tubs. This will make a backyard more perfect and a hot tub on a deck can come in under your needs and budget. If you are planning on installing a hot tub then you need to be careful with planning, along with determining the optimal location by understanding any electrical requirements. So, we have pulled some ideas for a hot tub, by changing a normal backyard into a dreamy place.
About Hot Tub On A Deck:
A hot tub on a deck is entirely possible and for this, you need to design a deck that holds at least 100 pounds per square foot. This kind of deck will support any type of hot tub, so while building the new deck, it is important to calculate the load-bearing capacity of the deck.
There are different types of hot tubs available in the market, so if you are planning to add one to your deck, then you know should what type of hot tub you need.
Portable hot tubs can be moved as individual units and they are not very portable because of their size and weight. It is portable because all the equipment needed for the tub is contained within the hot tub unit itself.
An inflated hot tub will come in a large box and can weigh 60 to 100 pounds making them a truly portable hot tub. They don’t come with a pump, filtration, or any other equipment.
An acrylic hot tub has an inner shell that is made of acrylic and an outer shell that is made of other materials. You will find this tub in many different styles and looks, so this is the most popular.
A molded or polyethylene hot tub is a one-unit molded plastic tub. When compared to the acrylic version, it is far lighter. Among all the hot tubs, this is considered the best option for the deck.
How to determine if your deck can support a hot tub?
If you are planning for a hot tub on a deck then you should learn how much weight your deck can hold. A standard deck beam will hold a weight of 50 pounds per square foot.
Using a simple calculation, you can find the load-bearing capacity of your deck and for that, you need to know the tributary area of the deck posts. For example, if you have a 10*10 deck that is supported by 3 deck posts, a beam at one end, and a ledger board on the other end. You need to multiply half the length of the joist by half the distance of the beam on both sides. You will get the tributary area and for 10*10 decks it is 25 square feet. Then multiply it by 50 pounds per square foot, and you will get 1,250 pounds.
So, you need to place a hot tub whose weight will come under 1,250 pounds. If the weight goes higher then it will result in structural failure and injury. If you have a low tributary area then you can add more beams and posts, which is the most effective to reinforce your deck.
7 More Ideas To Consider
Carved Out Space
If you have an old deck, then this idea will add some additional space to your deck. Here, there will be a beautifully designed round hot tub that gets matched with a similar toned wood deck. This will give a pleasing touch to your outdoor space.
This privacy hot tub deck will work if you need a full spa effect hot tub. Go for a traditional fence or for more modern options like contrasting slatted screens. Both will work for any type of hot tub.
Small Space Deck
If you have an outdoor area with less room, then go for this small space deck. Here, a simple deck that is surrounded by the hot tub will look good and also create more space. If you want you can add unique items such as potted plants, which will give a unique look.
Hot Tub Deck With Bar Seating
A deck with a bar setup will feel like heaven at home, so you can arrange some bar seats around the hot tub. This will indulge everyone both in and out of the hot tub. This comfortable space will ensure everyone lounges together.
The Sunken Hot Tub Deck
If you are tired of the same old hot tub bathing ideas and are looking for some newer ones, then this works really well. Try the full dunk or build a bench around the edge, so that everyone will get a place to sit and they can even dip their toes in the water for a relaxed feeling.
Hot Tub Deck With Fireplace
This hot tub is mostly designed to keep your bottom half nice and toasty, but what if we add a warm feel around the deck? You can add a fire pit or a luxe fireplace, which will guarantee both a warm and fun hot tub.
Pergola Hot Tub Deck
A pergola is one of the best options to set a hot tub, apart from the rest. It not only offers enough shading, but also you can string some lights for any nighttime bathing. This type of hot tub may feel secluded but will still be tied to the space.
A hot tub on a deck is an excellent addition to your outdoor space or backyard and it will be the best place to host guest parties. You always need an expert opinion before you install a hot tub and you need to follow certain guidelines, which will help estimate what your deck can handle. So, spending money on the hot tub is always a good decision to make in the end.
10 Impressive Ideas for Remodeling the Living Room on a Budget