11 Sharp & Creative DIY End Table Designs For Your Home

11 Sharp & Creative DIY End Table Designs For Your Home

Are you thinking of adding an end table to sharpen up the look of your living space? Why spend money on a boring end table when you can DIY it! An end table is typically beside a chair or sofa and provides a convenient stand to rest anything you want on it. Most end tables look very unexceptional, but they can be so much more!

diy end table in white room

Feel uninspired and in need of unique DIY ideas? Look no further! In this article, we’ve compiled 11 sharp and creative DIY end table designs for your home that will make your space stand out! Also, we answer some frequently asked questions about DIY end tables. So let’s dive in!

11 DIY End Table Designs


1. Old Clock End Table

clock end table

Do you have an old clock lying around your house? Perfect, you can turn it into a gorgeous and unique end table! All you have to do is find and paint wooden legs and boards to complement the colors of your old clock, and you’re all set! Make sure it’s a big enough surface to hold whatever you plan to adorn it with before you start your clever DIY project.

This project should be easy for beginners and shouldn’t take more than a weekend, given you have the right materials at your disposal! It will be a timeless addition to your beautiful home, and you’ll have people inquiring which store you bought it from – and you can then gloat that you had it handmade by yours truly!

2. Tree Stump End Table

Tree stump end table

If wood and tree stumps add to your home’s aesthetic, this creative DIY table idea will be the perfect addition to your living room. You can grab a tree trunk from just about anywhere, but hopefully, you have an extra one in your backyard, and you’re all set to get started.

With wood, you can buy exterior paint and make it look exactly the way you want it. Or you can choose to leave the wood unpainted for a rustic end table. The possibilities are limitless once you get those creative juices flowing! Basic but very sharp, this end table idea will inspire your guests!

3. Wooden Cross-Legged End Table

wooden end table

Is your living room minimalistic, and do you want something to enhance the look? This bright idea is just what you’ve been looking for! It will provide not just a surface on top to decorate or hold your belongings, but it’ll also have a drawer to hold precious items and serve as storage space!

Creating this wooden cross-legged table should be easy-peasy for beginner and intermediate DIYers! All you need is your basic tools, some time, and dedication! This cross-legged end table will be simplistic yet rich effortlessly!

4. Stacked Books Table

Stacked books table

Are you and your family book lovers? This unique end table idea adds a screaming personality from the moment you step into your living room! A cute stacked books concept with a glass surface on top is such a creative design that you probably don’t come across regularly.

But hold your horses. As easy as this idea looks, it still requires some DIY magic! You need rustic hardcovers or whatever style of hardcover book suits your aesthetic. Make sure you don’t need these books – they are furniture now, not reading material! Then, you need to stabilize the books by firmly gluing them together. And, you need to secure the glass on top so it doesn’t slip off. This original idea will get guests talking!

5. Minimal Glass End Table

Glass end table

Do you have a modern, minimalistic theme going on in your living room? This glass end table will add a perfect minimal touch to your space while keeping it clean and sleek!

This glass end table uses old pipes and circular or square glass and is relatively easy for beginners and intermediate DIYers alike. Paint and shine what you need to finish the table, looking fresh and glossy. Once you’re all done, you can probably snap a photo and get featured in a model home magazine for how sleek your living room will look! No one will believe that you made this end table with your own two hands.

6. Wooden Plank End Table

wooden plank table

Are you looking for an easy DIY end table? This wooden plank table will hit the spot! All you need is a plank of wood – preferably thick – some paint and a few sturdy legs to prop it up!

An easy project for DIY beginners, this end table design is trendy and artistic! Who says simple pieces of furniture won’t stand out? With this handy wooden plank end table, you can decorate it with just about anything, and guests will think it’s store-bought!

7. Caged Table

caged table in white room

Do you want to create a unique table design? This is it – a caged end table! It’s clever, different, and tasteful, all in one! It doesn’t require too much planning and building on your part so you are so much closer to achieving the living room of your dreams! 

Take a cage – whether you have an unused one or need to buy a new one – and add some stabilizing legs or non-slip risers. You can shave off the top and add a circular glass, or you can flatten the top of the cage to achieve the perfect caged end table for your living space! Then, be prepared to wow your guests!

8. Modern Bookshelf End Table

bookshelf end table with black couch and plant

Looking to make a simple yet effective end table design? Try building this modern bookshelf end table! It’s sleek enough to pass as store-bought and unique enough that you won’t find it easily at other people’s houses.

DIYers who are beginners and intermediate will be able to build this end table fairly quickly. All you need is wood or shelving, legs, and power tools to make this creative table a part of your home!

9. Wooden Crate End Table

wooden crate end table

Do you need storage space in your living room but don’t know how to include it as a regular table? This wooden crate will serve as an end table but also the ultimate storage spot!

All you need are crates that you can paint to whatever color that suits your aesthetic, and you’re good to go! Even though this might be one of the easiest DIY projects on this list, it’s still a classic and beautiful addition to your living space! 

10. 3-Ring End Table

three ring table with white lamp

Looking to build an efficient yet eye-catching end table for your living room? This 3-ring table is the perfect catch!

This one is basic enough to make for beginner, intermediate, and veteran DIYers, you can build this three-ring table in one weekend. It’s sturdy enough to hold items on its top surface and even has storage space on the bottom two rings to hold your magazines, books, or TV remotes! Your guests will be drooling over your DIY mastery!

11. Coconut Shell End Table

coconut table

Have you ever been to a house that had a coconut shell end table? Most likely you haven’t, and that is why it’s such a creative DIY idea to snatch all for yourself! This sharp end table idea will probably take some time while you collect coconut shells – pro tip: ask your friends and family to donate their coconut shells to you! – but it will be oh-so-worth-it!

We recommend this to the pros who have experience sanding, painting, waterproofing, and super gluing. This coconut shell end table will be a real challenge to accomplish, but once it’s done, you’ll feel proud of your hard work, and you’ll earn a myriad of compliments from guests! 

FAQs About DIY End Tables


rustic wood table with plants

Q: What is the difference between the side and end table?

A side or accent table is a small table placed along the wall of a room, while an end table is a small table directly next to a chair or at the end of a sofa.

Q: What materials and tools are needed to build a table?

The materials you use to build your table depending on your idea and the scope of the project. The possibilities are endless if you are using material around the house that you don’t need anymore – so stay creative!

The main tools you need to build a table include a table saw and its accessories, a miter saw, doweling jigs, chisels, and a coping saw. Other supplies might include an orbital sander, circular saw, brad nails, spray paint, wood filler, or copper pipe. You can source the wood from different places, too. Repurpose a nightstand or bedside table or make the most out of pallet wood.

Q: How do I make my table higher?

Maybe you bought a new couch that is taller than your old couch or maybe you messed up the measurements. Whatever the case, you can make your end table higher by adding lifts or wooden extensions to the legs. You can also replace your table legs completely to make sure you get the exact height you want!

Final Thoughts

DIY end tables are eye-catching and 100% unique. Rather than buying a boring piece of furniture online for an insane price, why not choose the DIY route to create an interesting and rare piece that will turn heads and feel homey?

Hopefully, this list of 11 sharp & creative DIY end table designs for your home sparked some ingenious ideas! Make it a weekend or week-long DIY project and impress your family and friends with your DIY mastery!

Happy building!

 

Read More Here – How To: Build a DIY Gas Fire Pit – In Few Simple Steps

 

How To: Build a DIY Gas Fire Pit – In Few Simple Steps

How To: Build a DIY Gas Fire Pit – In Few Simple Steps

Building a fire pit in your backyard or patio is the best way to set yourself apart from the rest. It’s patio season, and it may just be time to get your hands dirty with a new DIY gas fire pit project that is easy to make for all skill levels!

diy gas fire pit

Gas fire pits can be built on grass or concrete or even patio pavers installed. A simple DIY gas fire pit should take approximately three to five hours to make, which makes it a great weekend project for you and your family!

Why spend an insane amount of money on a fire pit when you can build your very own fire pit with your family’s unique touch? In this article, we cover the materials and tools you will need to get started as well as a comprehensive step-by-step guide to build your fire pit and answer some FAQs. Let’s blaze through this so you can start your DIY project!

What You Need for a DIY Gas Fire Pit


Materials

  • Concrete wall block
  • Gas Burner DIY Fire Pit Kit and Control Panel (you can buy this online or in stores)
  • Lava rock (or other filler recommended for use with gas fire pits)
  • Exterior-grade concrete adhesive
  • 1-2 AAA batteries for igniting the burner
  • A vapor barrier (if you are building it on grass or pavers)

Tools

  • Level
  • Mallet
  • Caulk gun
  • Shovel (if you’re building on grass)
  • Adjustable wrench
  • 7/16” wrench
  • Electric screwdriver with Phillips head bit

Step-by-Step Guide to Build a DIY Gas Fire Pit


Having all the materials and tools at hand, you are now ready to start building your own DIY gas fire pit! If you are a beginner in DIY projects, remember to take your time and relish each step.

Here is a step-by-step guide to building a DIY gas fire pit in a few simple steps:

1. Plan where to build a gas fire pit

You want to make sure the location is ideal and decide how you want to supply gas to this location. If you want to run a natural gas line to the unit, you have to get it installed by a certified gas tech before you start this DIY project. You want to also make sure you check your city regulations to ensure you build your fire pit legally and according to code!

2. Make your markings

If you’re building your fire pit in the grass, mark a circle with a 40” diameter and remove the grass and roots with a shovel. Remove 2” of soil within the circle. Level the soil where you are going to build your fire pit and add 1-2” of paver base to it. Make sure the paver base is packed and use a level throughout the entire process. 

3. Install a vapor barrier (This step is only if you are building it on grass or pavers)

After you install the paver base to the grass, you need to install a vapor barrier to prevent moisture damage and protect your gas fire pit. If you are building on concrete, you don’t need a vapor barrier!

4. Lay the first ring of concrete wall block

Outdoor fire pit

Lay the concrete wall blocks in a circle. Use something like retaining wall blocks to hardscape blocks. A 32” – 37” diameter is recommended. You can use a rubber mallet to secure the blacks and make sure they are level.

5. Place next ring of concrete block – leave room for the control panel

Next, place the second ring of concrete block, leaving a space to insert the control panel. Make sure the concrete blocks have enough space to allow air to flow between them, under the burner. Your kit will come with specific instructions in the manual so you can follow that accordingly!

6. Apply concrete adhesive to blocks

Once you have the concrete blocks positioned and spaced appropriately, you can start the adhesive process. Remove a single block and apply the concrete adhesive to each side. Place the block back on the ring and apply firm pressure. Repeat this process for each block in the ring.

7. Assemble burner and place on top of concrete block ring

You can now put together the burner and put it on top of the concrete ring. Make sure you have  1” of overlap to secure the ring. Again, check the manual to your Gas Burner Kit for proper assembly and connection instructions.

8. Lay the third and last layer of concrete block

Once you secure the burner, you can lay the third layer of the concrete block around it, repeating the same adhesive process.

9. Let adhesive cure

Let the adhesive settle for a few minutes. During this time, you can gently add lava rock to cover the entire burner area by about 2 inches.

10. Light it up!

Now it’s finally time to light up your new fire pit! Flick the on switch on the control panel, huddle around with your family and friends and enjoy the night!

FAQs About Fire Pits


Q: What do you fill a gas fire pit with?

Fill the burner with about 2-3 inches of lava rock or fire glass. If you want a more traditional look, use lava rock. But if modern is more your aesthetic, go with fire glass! Make sure to use only filler that is appropriate for a gas fire pit as other rocks may explode or crack when exposed to heat – so read the front carefully before buying!

Q: Should you vent a natural gas fire pit?

Fire pit next to lake

Proper ventilation is necessary for any fire pit – whether it’s propane or natural gas. You can either create a vent under the control panel or space your concrete blocks so that there is some space in between to vent hot air.

Q: Can you put a gas fire pit on a wood table?

Gas fire pits can be safely placed on a wood deck or table – as well as on concrete, grass, or paver patio. While it all depends on your outdoor design and theme, make sure to create proper ventilation, and you’re good to set up anywhere. The operation will be easy with the control panel.

Q: How tall should a gas fire pit be?

A fire pit above ground should be about 12-14 inches tall or just a few inches shorter than the height of a patio furniture seat, which makes it the perfect height to enjoy the fire. Following the guide above and setting three concrete rings should work efficiently!

Q: Are gas fire pits warm?

Unfortunately, gas fire pits do not put out as much heat. It radiates off a reasonable amount of heat to create a cozy environment, but it would struggle to make you feel warm if used outdoors on chilly evenings. Another plus is that it doesn’t give off any smoke or flying sparks, making it safer and more enjoyable than wood-burning fire pits.

Q: Can a gas fire pit get rained on?

Technically, a gas fire pit can withstand rain for an extended period. But it will start rusting, and the gas burner will malfunction from excessive moisture if you don’t protect and clean your gas fire pit properly.

While it can handle nature and rain, make sure you protect and clean your gas fire pit after every use to keep it running smoothly for years to come!

Q: Why did my fire pit explode?

Concrete blocks and other materials used in DIY fire pits can, unfortunately, trap water inside. When it’s heated up while moisture is stuck inside, it can cause an explosion. To prevent this, make sure you install a vapor barrier when building your fire pit, create proper ventilation and cover it up firmly when it’s not in use.

Final Thoughts

Gas fire pits allow family and friends to gather around, get warm and cozy, share stories and create a lifetime’s worth of memories. Many choose to buy an expensive gas fire pit or fire table, not even considering the possibility of making one themselves.

DIYers know the significance and value of building things themselves. A gas fire pit is one of these things and can easily be built in a few hours if you have the necessary tools and materials. Finding DIY methods to build and fix things around your house will cut your expenses in half and leave you feeling fulfilled and proud of your skills!

If you were wondering how to build a DIY gas fire pit in a few simple steps, hopefully, this article answered that and all the other burning questions you had.

DIY doesn’t have to be so hard! Exciting times are ahead, so have fun and make sure to enjoy the process!

 

Read More Here – How to Create DIY Custom Shelves For Any Home Decor Style

 

How to Create DIY Custom Shelves For Any Home Decor Style

How to Create DIY Custom Shelves For Any Home Decor Style

Making custom shelves all on your own, with the knowledge that you just saved a lot of money and that you were able to finish a task most people leave to the professionals, can bring someone a lot of fulfillment. Building custom shelving, whether you want a glass shelf or a floating shelf, is a perfect project that will increase the amount of storage space you have throughout your home or garage.

 

Custom Shelves in black white and wood pattern

How to Create DIY Custom Shelves For Any Home Decor Style

To get started on your custom shelves, there are some tools you’ll need:

  • Square
  • A set of drill bits
  • A cordless drill
  • Drywall saw
  • Forstner drill bits
  • Framing square
  • Carpenter’s glue
  • Earplugs
  • Level
  • Miter saw
  • Orbital sander
  • Pocket hole jig
  • Router
  • Safety glass
  • Sawhorses
  • Screw gun
  • Stud finder
  • Table saw
  • Tape measure
  • 1/16-inch-thick washers
  • Silicone caulk

No matter what room you enter in your home, you’ll be able to find increased storage space located inside of drywall sheets. If the drywall is recessed, you can use that space for cabinets. This can be seen as a lot of wasted space that people can use for custom shelves, and there are a few ways to construct them all on your own.

Shelves With Glass Door Coverings

With the first method, you only require a few basic carpentry tools to get started. If you have a pocket hole jig, that’s a bonus. This method is perfect for those that have never even hit nails into planks before, and it should only take you a weekend to finish.

A shelving unit with glass door coverings is perfect to install in your bathroom to store your toothbrushes, dental floss, soaps, and anything else you have.

To get started, you’ll want to cut an inspection hole to see what you’re getting yourself into. Get your stud finder and ensure that the gap between your studs is 14.5 inches, at the minimum. Before getting ahead of yourself and slicing a large hole, cut a smaller one and do an inspection.

A compact mirror and a flashlight come in handy when doing this step. You’ll be able to see what’s behind the wall much easier with these products. Check to see if any wires or pipes will get in the way of your project.

If you notice that there are too many wires or pipes in the way, you’ll want to patch up your wall and seal it off before moving on to look for another area that might work better.

The Hole

If you cut a small hole and did an inspection and found no obstruction in the way, you can now proceed to cut a larger hole in the wall. Make sure you use a pencil to do a layout on the wall to mark where you’re cutting. A drywall keyhole saw will be your first choice of tools to use for this step. Navigate the saw right along with the wall studs and then take out the drywall.

Taking Measurements For The Custom Shelves

Measuring for the custom shelves

After that, begin measuring the space located between the wall studs and then take off half of an inch to figure out how wide your cabinets will be. You’ll be measuring from the edge of the drywall all the way to the opening. Make sure you take off a quarter of an inch to figure out the depth of the cabinet that will be installed.

If your walls are constructed from 2×4 studs and half an inch drywall, you can easily just use 1×4 planks to construct your cabinet box.

Support Holes

Get a pegboard and start making the layout of where you will be drilling into. The holes will require a 1/4-inch drill bit. After you drill one hole successfully, get a clamp to attach the layout you’re using to it. A stop collar on the drill bit you’re using will ensure your holes won’t be going in too far or too little, and you’ll thank yourself later if you do this.

Begin to drill the holes for the pins that support the shelf. You might be wondering how far of a gap to leave between each hole you’re drilling. It’s best to leave about two inches in between your holes.

Assembly of the Custom Shelves

At this point, you need to drill clearance holes on each side before screwing in the top, bottom, and sides. Start to cut plywood that will be the back of your cabinet box. One recommendation here is to nail one side at a time.

After that’s done, make sure to take diagonal measurements to ensure your cabinet is completely square before you go ahead and begin nailing the sides and end.

Once that’s finished, you can start to cut your custom shelves to the proper length. To figure out the length of your shelves, take a measurement of the distance between the sides and then take off an eighth of an inch.

Pocket Holes

You can now go ahead and start to drill your pocket holes. Once they’re finished drilling, you’ll want to clamp your pocket hole guide to the face frame rail. Get your special stepped drill bit and begin drilling the remaining holes.

Face Frame Assembly

You can now cut the parts for your face frame. If you want, consider overlapping the inside edge of your cabinet about an eighth of an inch for a stylish effect. Start to drill your holes in the sides of your cabinet and then secure the face frame onto it using your pocket screws.

Some people don’t have a pocket hole kit. If you don’t have one, you’ll just nail your face frame parts directly to the cabinet using finish nails instead. There will be tiny holes left over after you do this, so you’ll want to get some finishing nails and fill in the holes after that.

Securing The Face Frame To The Cabinet Box

Drill some pocket holes around the perimeter of the cabinet box and then start to line up the face frame before clamping it in place. Get your pocket screws and begin to drill them into the pocket holes that you just finished drilling.

Installation Of The Cabinet

Installing the custom shelves

At this point, you can now insert the cabinet into place. Make sure to level off the cabinet and get your driving screws before popping them into the shelf support holes to fasten everything snugly. You’ll drill screws into the bottom and top of the cabinet. Once you’re done that, check if everything is still level.

If drilling the screws in has accidentally made things unlevel, loosen the screws or tighten them up to level things off again. After you’re done that, drill some more screws into the sides of the cabinet. You can also use nails right through the face frame of the cabinet.

Consider Adding In Glass Doors

Glass doors can make custom cabinets look a little more luxurious, and they are a perfect addition to use in any bathroom. If you’re going to consider this option, you’ll want to keep in mind that the doors require a very good fit, and they are a little more complicated than your standard door cabinets.

It always helps if you have a little woodworking experience, but it’s not mandatory.

Because pocket screw joints were used to assemble your doors, you won’t have a problem with adjusting the hinges. You just need to make sure that all of your measurements and cuts are precise.

To make the cabinet fit more accurately, there is a chance you’ll have to take out a strip of drywall that is on the middle stud.

Cabinet Boxes

To join the cabinet boxes, you’ll need to glue together the half-inch thick mull and then clamp them together. You should also screw some temporary braces in place on the bottom and top so that the cabinet is securely in place before you go and install the face frame.

Face Frame

This face frame will require a perfect fit between each side of the cabinets so that the hinges will be concealed from sight. Make your bottom and top cuts on the rails so that they will fit properly in between each side of the cabinet. Line up the inside edge of the cabinet box and clamp everything securely.

Make your face frame stiles measurements and then begin cutting accordingly. Take out the face frame parts and start to drill some pocket holes. You can now assemble the face frame together using your pocket screws.

The pocket holes should be around half an inch from each edge for best results.

Door Rails

At this point, you can take measurements for the door rails. After that, make your cuts for the door stiles and put them in the face frame. Take another measurement for the additional space and take off 3/8 of an inch to figure out how long your door rails will be.

Fit

Before assembling the doors together, make sure everything fits in place. Put the doors in the face frame and secure them in place with 1/16-inch washers.

Glass

You’ll now want to mount a 3/8-inch rabbeting bit. It might take a couple of passes in a clockwise motion, and you’ll want to gradually increase the depth of each pass in order to make your rabbet that is 1/4-inch deep.

Hinges

Center your door in the cabinet and make your markets where the hinges will be going. Install your hinges to the mounting plates after you drill the holes for each door. Drill your screws into the hinges of your custom shelves.

Glass Panels

At this point, you can now finish your cabinets off by installing the glass panels. Apply some silicone around the edges and let it cure for the rest of the day and night.

After you’re done with these custom shelves, you can give yourself a pat on the back, especially if you’ve never used any of these tools before in your life.

 

Read More Here – Top 8 DIY Front Walkway Ideas to Consider in 2022

Top 8 DIY Front Walkway Ideas to Consider in 2022

Top 8 DIY Front Walkway Ideas to Consider in 2022

Designing a walkway in front of your home is a great way to boost its curb appeal and overall aesthetic in an efficient and effective way. There are many different front walkway ideas – from a curved walkway to a garden path – to consider. When it comes to landscaping, the only thing that limits you is the creativity of your walkway idea. You can incorporate elements that will make your walkway feel serene and peaceful, or incorporate other characteristics to have your home making a bold statement.

front walkway ideas with bushes and concrete steps

A good front walkway always starts out with figuring out what type of landscaping layout you’re going to go with. Do you want the walkway to lead directly to your porch, or do you want it to wander off to your garden path, leading to the backyard? Do you want your walkway idea ending right at your doorstep, or do you want it to continue around your yard? There are many different questions to consider when thinking about front walkway ideas.

You’ll also need to consider how to level the property is in your front yard, before thinking about designing a walkway. If you don’t have ideal draining, then things can get a little messy later on. You’ll want to make sure there are no hazards in your yard that people might trip on when strolling up the walkway as well.

There are many different types of materials and products you can decide on for front walkways. You can choose a stone walkway, a flagstone walkway, or a concrete walkway. The prices between products will vary substantially, so it pays to do a good deal of research before jumping the gun and bulk purchasing a certain product without further researching your walkway idea.

Brick walkway

Brick walkway ideas

If you have a colonial or traditional style of home, a brick backyard walkway is an ideal product to go with. There are many different ways to lay brick down in a way that will have your curb appeal looking much better than it was. Some of the different ways that brick can be laid down are:

  • Stacked bond
  • Running bond
  • Basketweave
  • Bordered herringbone

The nice thing about bricks is that they combine very effectively with other types of materials. If you want a welcoming color, red, tan, orange, and brown work very well. Hiring a brick installer might cost you between $10 to $25/sq ft, but many people like to use brick pavers and complete their brick walkway themselves.

Gravel

Gravel walkway

Gravel is another common product for front walkways because of how flexible and versatile it is. It’s a cheap option that works very well with many different styles of homes. It doesn’t matter if you’re in a cottage or living on a ranch, gravel is an affordable way to boost the aesthetic appeal of your walkway design and your home.

There are a variety of different colors of gravel you can choose from. Plus, you can also incorporate pavers and rocks into the mix.

A gravel walkway is easy to get going. You’ll want to initially figure out the perimeter of your walkway using stakes. Some people like to edge out the perimeter of their walkways using PVC pipe or a simple garden hose. Once you’ve done that, level out the entire area before proceeding to spread gravel, a layer of sand, and another layer of gravel over that.

One thing to keep in mind with gravel is that it’s not the best product if your front yard consists of slopes. It’s also not ideal if you live in a climate that gets a lot of snow, since that’s difficult to clear on gravel surfaces.

Pallets

Pallets and wood used as walkway

DIY people love pallets for many different things. You can use them to create an appealing-looking front walkway for your home. All you have to do is take the boards apart and use polyurethane on them to keep them sealed from the weather and constant traffic from people walking on them.

With pallets, your first step is to decide on the path your pallets will be installed in. You’ll then level off all of your soil and begin to place your planks where they should go. Make sure you leave around one inch between each plank.

Concrete front walkway ideas

Concrete walkway

Concrete is a very common product for front walkways. It’s so common a concrete walkway can tend to look mundane. There are multiple ways you can add some flare to your concrete front walkway, through things like:

  • Lacy designs
  • Spray paint
  • Stenciling
  • Texturing

Wood Chips

Woodchips

For people that live in a climate that isn’t prone to severe weather fluctuations at certain times of the year, wood chips can make for a great walkway. Wood chips are:

  • Natural for the environment
  • Are soft under your feet as you’re walking
  • Good at preventing weeds from getting into your yard

To get started with a wood chip walkway, dig out the area where your walkway will be going, install some plastic edging, proceed to layer a few inches of stone to ensure drainage, and then layer wood chips on top.

Tumbled Glass front walkway ideas

Tumbled glass as walkway

If you’re into using recycled materials, tumbled glass is a great product to use for front walkways. This product comes from recycled bottles. All of the sharp edges are removed from it to leave you with translucent stones in a variety of different colors. Tumbled glass is pricier than wood chips, but it doesn’t require anywhere near as much maintenance, and it’s also a durable product that will last you a long time.

Logs

If you want one of the more natural front walkway ideas, consider gathering a bunch of logs, pruning them, and creating a walkway with them! You’ll want to make sure the logs are each the same size in diameter. Ensure to give them a good coat of polyurethane before placing them on a layer of sand on your walkway. If there are any gaps leftover, put some gravel or dirt in between the gaps.

Mosaic front walkway ideas

Mosaic front walkway ideas

If you really want to create a distinctive walkway, consider creating a full pebble mosaic. If you manage to find the materials from a beach, you can save a lot of money in comparison to paying a supplier for it. A mosaic front walkway requires a lot of time, preparation, and planning in comparison to some of the other options on the list. You’ll have to:

  • Construct a mold
  • Pour concrete
  • Figure out what pattern you’re going to use

Getting a little creative with front walkway ideas is a good way to showcase your home and display a sense of style and personality. Considering these ideas will help you determine which might work for your front yard, or even your backyard.

Read More Here – Easy DIY Storage Cabinet Build – Here’s What You Need

 

Easy DIY Storage Cabinet Build – Here’s What You Need

Easy DIY Storage Cabinet Build – Here’s What You Need

Cabinets are something that can end up costing quite a decent chunk of money. For people on a budget, a DIY storage cabinet can be a fairly straightforward project that will have you saving money and time while increasing your overall organizational effectiveness.

DIY storage cabinets are perfect to install in garages, basements, laundry rooms, and basically anywhere where you think you might need more storage space.

diy storage cabinet

 

To get started, there are some basic tools you’ll need:

  • Table saw or circular saw
  • Clamps
  • Drill
  • Edge trimmer
  • Level
  • Iron
  • Utility knife

 

The materials you’ll need for this DIY storage cabinet are:

  • 1-1/4-inch screws
  • 1/4″ overlay hinges
  • 1×4 pine (ensure it’s construction-grade wood)
  • Three-inch screws
  • Edge banding
  • Particleboard

While using a table saw will be more convenient for a project like this – whether you’re building a garage cabinet or a wall cabinet – you can get away with using a circular saw. You don’t need to be a skilled carpenter or handyman to make a storage cabinet. If you can operate a saw to make cuts and are able to screw together things, you should be just fine.

The only two materials used to make these cabinets are particleboard and pine. If you don’t want to bother having to finish your cabinet, then just use melamine. Melamine is a coating that is used on particleboard.

All in all, you should be able to make these cabinets for under $40 per square foot of wall space. You’d never be able to purchase cabinets at a place like Home Depot for anywhere near that price.

Consider Where Your Cabinets Will Be Going

The first step is to think about what area of your home you’ll be installing your cabinets in. For example, DIY garage cabinets will have different requirements than kitchen cabinets. To determine where you want to install your cabinets, place some masking tape on the wall on the area you think your cabinets will be going. When considering your cabinet layout, keep in mind that a cabinet requires a stud behind the wall so it can be securely fastened.

The width of the doors on your cabinet should be two feet or less. If you want a cabinet with a wider opening area, consider installing two doors. Keep in mind that shelves on cabinets that are over two feet in length tend to sag when objects are placed on them. If you’re considering going with shelves that are longer than two feet, screw cleats underneath them.

Melamine

Now that you’ve figured out your cabinet layout, you’ll want to decide what type of melamine to go with. A lot of hardware shops will have 4×8 sheets in white. If you don’t want to go with white, consider going to a lumberyard. They might charge a bit more per sheet, but you should be able to find a wider selection of colors.

Now that you’ve got your melamine and layout dimensions, you can start cutting it into pieces. Make sure that you’re cutting exactly the same widths for each side of the shelves. Melamine is sometimes difficult to carry around on your own. If you have a friend or family member nearby, consider asking them for assistance.

Melamine is also sharp. You’ll want to wear a pair of gloves while handling it because it can cut your hands. Always make sure you’re doing your cuts on cardboard or some old carpet you have laying around. You don’t want the melamine to scratch while you’re doing your cuts.

Always exercise a lot of caution when handling your melamine because it tends to chip easily.

Once you’re done cutting the width measurements for your melamine, get your iron and set it to the cotton function. Begin ironing the banding in a few smooth passes each way.

The banding will just need to be easily tacked and situated properly as you’re running the iron over it. On the second pass, go a little slower and ensure that the glue is sticking to the banding. After you’re done that, inspect the edges to see if anything is loose.

Trimming

You’ll now want to trim the edge banding of the melamine. Get a block and hold it securely over one end while you cut off the additional banding. Get your edge trimmer and start cutting off the banding precisely.

If you’re not experienced with your edge trimmer, consider doing a few trials runs with a piece of scrap wood. If any damage occurs to your banding while you’re giving it a trim, reheat it with the iron and begin again.

Drilling

The next step is to drill the support holes for your shelves. You’ll want to drill 1/4-inch holes into the sides of the cabinet. It helps to get a scrap piece of pegboard to help guide you. After you do that, you’ll want to put a label on your pegboard to make sure that all of the holes you’ll be drilling will line up perfectly.

When you’re drilling, make sure that you drill right through each side fully. The holes that you’re drilling should be around 3/8 inches deep. If you have any masking tape handy, you can wrap some around the drill bit you’re using to make sure you don’t drill too far or too shallow. If you really want to be precise, consider getting a stop collar for around $5.

Before you start to drill, you’ll want to inspect your shelf supports. There are some that need 1/4-inch holes, while other ones might need 5mm holes. If you have a brad-point drill bit, you’ll be able to get a more precise hold that will be free and clear of any chips.

Crosscutting

Melamine panels and pine will be installed between each side of the cabinet. If you’re focused on aesthetics, you’ll want to pain the pine 1x4s to look the same shade as the melamine. If your cabinets are under four feet high, you will only need fixed shelves for the bottom and top. In order to construct fixed shelving units, all you have to do is slice both the melamine and the 1x4s into similar lengths and then proceed to screw both of them together.

A crosscut guide always helps to make your cuts. Using a stop block helps to ensure your precision for each cut that you make.

Assembly

Assembling the storage cabinet

Many people start getting excited when they get to the assembly a portion of their DIY storage cabinet. For this step, all you have to do is secure the sides of the cabinets to the fixed shelves. To make things easier, it helps to predrill a screw close to the front of each shelf that you’ll be installing. When you’re doing this, ensure that the banded edges are completely flush.

You can then screw the 1×4 pieces of pine into the melamine. By this point, things will start appearing more like cabinetry. The shelves should be screwed to each side of the cabinet. Make sure to drill a screw in the rear of the cabinet so that your shelves are securely held in place before you begin to start using the rest of the screws. Make sure that you exercise caution when handling the cabinet box at this point.

Hinges

In order to install doors on your cabinets, you’ll need to install hinges before that. Wrap hinges are fairly straightforward to use, and you simply wrap them around each front corner edge of your cabinets. If you don’t currently have wrap hinges, you can go to any hardware store and ask if they carry 1/4 overlay wrap hinges.

Wrap hinges are perfect for a DIY storage cabinet for two reasons:

  • They provide a secure and solid mount for your cabinet doors
  • They allow you to accurately position your doors even before fastening them in place

Make sure to keep your hinges around a quarter of an inch apart from the corners of your cabinets. If your cabinet doors are around 12 inches, then you should only need about four hinges.

Cabinet Door Positioning

Once you’ve got all of your hinges installed, you’ll want to take some measurements to figure out the width of your doors. You’ll want a 1/8-inch gap between each cabinet door. To figure out what length you’re going with, you’ll simply measure the opening of your cabinets and increase that measurement by 3/4 of an inch.

Begin to cut your cabinet doors and then situate them in place to make sure they fit properly before you begin to band the edges. After that, align the doors to the hinges with shims while making sure you have that 1/8-inch gap. Get your clamps and secure the cabinet doors.

Hanging Your Cabinets

After you’ve got everything put together, you can now hang your cabinets in the position on your wall where you made your layout with masking tape. It always helps to do this step with a helper, as the cabinets will need to be supported while you drill the screws into them, and it can be difficult to do both at the same time.

A DIY storage cabinet can be a fun and exciting project. They’ll have you saving money and feeling better about yourself in knowing that you didn’t have to consult with a professional cabinet installer to get the job done.

Read More Here – How to Install and Organize Your Outdoor Hanging Lanterns

 

5 DIY Table Top Ideas & Designs For More Beautiful Living Rooms

5 DIY Table Top Ideas & Designs For More Beautiful Living Rooms

Tables are often the centerpiece of any room. Whether you have a dining table, coffee table, or even a Thanksgiving table, these spaces are where we gather, eat, play games, and even do work. So, it’s important to make sure you care for your tables and ensure they’re always neat and uncluttered. Table top ideas aren’t hard to find if you look hard enough.

But tables don’t always have to just be functional. A simple table top can get boring after a while. It’s always a great idea to liven up your table top and give it a wow factor. Luckily, there are several ways that you can add a touch of flair to your table to make it a functional yet stylish part of any room.

Keep reading to find out some great table top ideas to make your living room table stand out. These ideas are easy, and you can even make some of them into a fun DIY table project!

Top 5 Table Top Ideas

Top 5 Table Top Ideas

Transforming your table isn’t as difficult as you might think. Only the table top needs to be drastically changed, and as a flat area, you can easily implement several different ideas.

To help you figure out what direction you want to take, here are five table top ideas to brighten up your table.

Paint it

This is the simplest way to transform any piece of furniture. When properly done, it can have a great impact on the way your table stands.

Painting your table is an easy way to personalize it and make it pop. There are so many options to explore when it comes to painting your table that it can be difficult to settle on just one idea.

Here are some examples of what you can do with paint and your table:

  • Try an intentionally messy paint splatter design
  • Paint the table top a different color than the table legs to turn it into an accent piece
  • Create a pattern
  • Paint a design on the table top

The opportunities with paint are virtually limitless. The best part is that if you mess up, it’s easy to fix: just paint over the mistake and try again!

Create a mosaic

Create a mosaic

A more complex table top idea than painting, a mosaic brings brilliance to your table and gives it that handcrafted look. Creating a mosaic table top doesn’t take as long as you might think! You just need the proper materials, including:

  • Mosaic tiles
  • Sea glass (optional)
  • Tile adhesive
  • Sealant

Make sure you start off with clean mosaic tiles, then tile the rim of the table. Then, if you’re using sea glass, you’ll want to lay it out on the table top. From there, pour the sealant and add the mosaic tiles. Remove the excess grout, and you’re done!

This DIY table top idea allows you to get creative and experiment with different mosaics and materials.

Pennies

The United States is in the minority of countries that still use pennies, but many people find little value in the currency and often keep them in jars where they collect dust.

If you’re one of those people with a collection of pennies that you don’t know what to do with, why not turn them into art? Many people and establishments are laying pennies out on their table top to give it a rustic look.

Start by sanding and glazing your table top. Stain and finish the table, then move on to the pennies, which need to be cleaned with tarnish. Glue the pennies on your table top, then glaze them for a finished look. You can do something similar with other circular materials, such as bottle caps.

Glass Table Top

Glass Table Top

This is an easy table top idea to give any old table a new, modern look. It’s also an easy idea to execute since all you need is an old table and a piece of glass that fits the table top.

If you’re using a really old table that needs some work, make sure to start by finishing the base with a stain or by painting it. Don’t forget to finish the top of the table, as it will be visible beneath the glass.

Take your glass top and use screws with rubber washers to secure it to the top of your table. Make sure the glass is clean when you do this, and clean it again once you’ve added the screws. This is a quick and easy way to modernize your table and make it suit any decor style.

Mix and Match Tiles

The final table top idea is another one that you can do using old materials.

Have you recently renovated your kitchen or bathroom and had some tiles left over? Instead of throwing them away, use them to make your table top unique.

All you need to do is lay out your tiles and stick them together with adhesive. Then, take your caulk gun and fill in the tiles as if you were applying them regularly to the wall. Add grout and make sure the tiles are clean, with no residue. Then, apply the finish.

If you don’t happen to have any tiles lying around, you can sometimes find some old ones by searching garage sales or thrift stores. Using different tiles lets you level up the mix-and-match factor and add even more uniqueness to your table top.

Final Thoughts

Table tops are one of the easiest pieces of furniture to update and personalize. Whether it’s your kitchen table, living room table, or desk, there are many ways you can add a touch of flair to your table top, creating a statement piece in your room.

Hopefully, these table top ideas provide you with some guidance and drive your creativity!

Read more here-

How to build Pole Barn garage