Can I Put The Hot Tub In Garage – A Short Guide

Can I Put The Hot Tub In Garage – A Short Guide

After a hard and stressful day, a soak in the hot tub will be the blessing of everyone’s life. Most people want to invest in a hot tub, but they don’t know where to put it. Most people don’t know that their home has a hidden place that can occupy the hot tub. Lots of people, wonder can I put the hot tub in garage?

Yes, the garage is the best place to keep your hot tub, and it also doesn’t cost a lot of money for maintaining. If you think it is not possible to keep a hot tub in garage, then this article is for you.

Can I put the hot tub in garage?

Can I put the hot tub in garage

The placing of a hot tub in garage is one of the best choices, but to execute the plan you need to make certain changes. If you keep your hot tub inside it comes with a lot of benefits, as you can use the tub whenever you need it regardless of the weather outside. Also, it offers the utmost privacy and it is as convenient as you can go straight from the hot tub to take a shower or enjoy watching TV.

You may have heard of keeping the hot tub in the sunroom or conservatory room, but keeping the hot tub in garage is something new to everyone reading this article. It may seem like a dream to most people, but you can make this dream a reality.

Here are the certain things which your garage should have or need to make, if you are planning for a hot tub in garage.

Things to consider before placing a hot tub in garage:


Insulating the garage

insulating the garage

Most garages don’t come with a heating system as we use the garage only for storage or to park vehicles. If you are planning to keep the hot tub in the garage, then you should properly insulate the wall. If you want you can even insulate the exterior walls. Properly insulated walls will have less condensation over the garage ceiling and walls, so it will prevent the growth of mold and mildew. Also, you can insulate the garage door which is easy to do, just add panel foam on the inside of the door.

Drainage

drainage for the hot tub

You can’t even imagine how much water will go out if a person gets out of the hot tub. So, there should be a proper drainage connection, or else the water will stay on the floor. You need to build a proper drainage system that allows water to escape, so a floor drain is essential. Also, ensure that the floor is graded properly to prevent stagnant pools of water, and remember that the hot tub should be properly drained and cleaned frequently.

Plumbing

filling the tub

After the drainage system, you also need to spend time organizing the plumbing system. Remember, it will take several hundred gallons of water to fill the hot tub, so it is not possible for you to fill the hot tub with a bucket. If you have a tap in the garage then that is fine, or else you need to install one so you can fill it with clean water.

Flooring

Garage flooring

For the proper installation of the hot tub, it should be placed on a stable and same-level surface. The concrete floor in the garage is considered an ideal location but you can also choose a surface that is water-proof and also offers high-resistant properties. If you place the tub in the garage, slipping and falling are the most common accidents. So, it would be worth spending on floor materials such as rubber or tile around the hot tub, which will give a comfortable feel when you get out and walk around.

Ventilation

ventilation doors

Ventilation is the most important factor to consider if you are planning for a hot tub in garage. Your garage should have an adequate supply of air as the hot tub will create more humidity and moisture. This is more noticeable if you have installed the inner insulation of the door. Only a proper supply of air in the garage will keep the garage away from moisture and mold-related problems.

If your garage doesn’t have enough proper ventilation then some of the issues you will face are condensation, mold, and wood rot. A garage is a place where the humidity will be high, so to prevent further issues you can install an exhaust fan. But never go for a noisy fan or central air system that creates more noise, as it will ruin your hot tub plan in the garage.

Mold and Mildew

mold and mildew

Mold and mildew are one of the most dangerous problems your garage can have. The most recommended temperature of the hot tub is 100 Fahrenheit to 102 Fahrenheit and even you can go a maximum of 104 Fahrenheit. The hot water in a hot tub will create warm and moist air inside the garage and when the moist air settles on the wall of the garage then mold will start developing.

The mold will develop if it has three sources; which are moisture, air, and the food to feed on, which is the drywall. To avoid such problems your garage should have a proper ventilation system that won’t allow the moisture to stay on the wall.

Spacing

spacing in the garage

Space is the most vital factor which is required for the installation of the hot tub. The two things that will determine whether the garage is spacious enough or not, is the size of the hot tub and the extra room around the hot tub for maintenance purposes. Also, make sure that you can bring the hot tub inside of the garage room, and after analyzing all these things you can bring the hot tub into the garage.

Bottom Line:

Yes, it would be the best idea to put a hot tub in garage and this is for the house that doesn’t have any space to accommodate a hot tub. All you need to have is proper space, ventilation, water, and electrical connections, and stable flooring. In winter, you can experience the warm temperatures by chilling in the hot tub in the garage.

Read more here – What is the average cost of a bathroom remodel?

Is Drywall In A Garage A Good Idea – How to do it

Is Drywall In A Garage A Good Idea – How to do it

Modern times have made the garage useful for a variety of purposes, whether it is to park a car, to store things or it can even be turned into an additional room.  So, whatever your plans may be, if you prefer drywall in a garage, then it would be worth your investment.

Drywall is considered to be a great addition to your garage and it is considered a great building material. The drywall in a garage is fire resistant, pest resistant, easy to install, and is also durable. It comes with a lot of advantages. In this article let’s discusses why you should consider drywall for your garage.

What exactly is drywall?

Is Drywall In A Garage A Good Idea

Drywall is the construction material that is used to finish walls and ceilings, and technically, drywall is nothing but sheets of treated gypsum. When gypsum is processed it becomes drywall, and then it can be used in the construction of modern buildings.

In earlier days, the walls and ceilings of many garages were covered by layers of messy platter on wooden strips, which is called a lathe. It is an expensive process and also looks extremely dirty on the wall, but the drywall in a garage is a cost-effective process.

There are lots of good things about drywall as it reduces the noise from outside, increases the lighting, and enhances the value of your home. So, the drywall for the garage is the best option to choose from.

Should I add drywall in a garage?

If you still think about why you need to consider drywall in a garage, then here are a few important things that you need to know;

  • Makes the garage comfortable

The drywall is the best option for people living in colder countries, as the drywall can be installed over insulation which will keep your garage warm and also helps the pipes from freezing. In warmer countries, it prevents the hot air from coming in, so it is a comfortable option for all kinds of climates.

  • Easy to add electrical outlets

Once you built your house, it would be a difficult task to add any extra wiring into your home. It will also look messy. If you have drywall you can easily add additional outlets and hide the wires inside the wall.

  • Add value to your home

Many reports have been saying that adding drywall in a garage will increase the value of your home in the future, even though it doesn’t directly add value, still a well-made garage will make your house look unique from other houses.

How to install it?

If you are planning to install the drywall sheets all by yourself, then make sure you have some extra drywall sheets and enough drywall screws that will be required. You need to know the height of the garage wall and start installing from the top of the wall rather than starting in between.

Also, make sure to leave some space between the floor and drywall, or else any water on the floor will affect the drywall and cause some mold issues.

Arrange the drywall sheets

Most drywall sheets will come in 4 foot by 8 foot panels, so you can fix them horizontally or vertically, but if your wall is 10 foot by 20 foot, then you have make to some cuts. If you plan to hang the sheets horizontally, then go for narrower sheets, and make sure not to waste any sheets while you are cutting.

Hang the first drywall sheet

sheet resting on studs

The first piece of drywall should be snug in the upper corner of the wall where it meets the ceiling, make sure not to make any mistake as every other sheet of drywall will depend on this. It should sit right next to the wall and ceiling.

Tighten them with drywall screws

Attaching drywall to walls using drywall screws

Once the drywall is setup in the right place, tighten them using the drywall screws. There be no more gaps where the drywall pops out from the stud. Tighten the screw till they flush with the drywall sheet but not too deep.

In the same way, you need to arrange other drywall sheets and start with any that will be snug against the ceiling.

Hanging sheets in garage

Cut the extra parts to make them fit

Cutting sheets with blade and t square

If you don’t have a perfectly fitted drywall sheet, then you may have to cut several parts to make them fit. Mark the top and bottom in the drywall sheet using a carpenter’s T-square and draw a light line to have a perfect cut.

Fill the large gaps

Fill gaps with drywall mesh

Once you are done with installing the drywall sheets, now it’s time to fill all the gaps. If the gap is small you can use paper tape, and for the big gaps, you definitely need a mesh.

Mud over the drywall screws

Mud over dry wall screws

Once the mesh is kept in its place, you can stuff mud drywall into the gap through the mesh. Next let it dry overnight, so that it will hold the mesh tightly. You can even cover the drywall screws using this mud to have a nice smooth surface.

Tape the seams

lump on wall

After filling the huge gaps between the sheets, we now have to get this wall sealer up so that it will look pretty. This is a crucial step, if you mess your drywall up you’ll have more speed bumps. If your drywall is against the wall and you can see daylight, then it is a flat joint. On the other hand, if they don’t have any valleys between the sheets, then it is a butt joint. Once all the joints are taped and mudded, Allow them to sit overnight.

Sand and smooth

Finally, you can do the sanding and smoothing to get a flawless surface. Depending on the texture of the wall, you can go for skim coating before priming and painting.

Bottom Line:

Nowadays, people are investing more when it comes to the garage as they store their valuable things there and that is why the drywall in a garage is considered the best option. It adds protection, longevity, and appeal to your garage.

Read more here7 Ways to Determine the ideal garage door size

7 Ways to Determine the Ideal Garage Door Size

7 Ways to Determine the Ideal Garage Door Size

Determination of a garage door size will usually depend on the type of garage you own. For instance; if you have a large garage then the door should be wider in the range of 22-24 feet. There should also be two single doors in the garage. On the other hand; if the garage is small in size, you can use a double door of 18 feet as it will provide extra space to enter and exit conveniently. The size of the garage doors will also depend on the size of the vehicle parked in it.

Bigger is not Always the Better

garage door size

One of the common misconceptions about the garage doors, is that bigger is better. This is not always the case and there are several considerations in deciding in favor of bigger garage doors.

  • Larger garage doors have more weight and you may need a truck to open and close them.
  • Conversely; you may use an automatic door opener, but it could be expensive. Moreover; only a person with a remote controller can use it.
  • As larger garage doors need stretching; it may easily alter the desired appearance which you opted for.

7 Ways to Determine Ideal Garage Door Size

House with brown garage doors

In any case; your objective will be to determine the ideal garage door size. This; however; is better said than done. For a person not as familiar with construction work techniques may find it extremely difficult to determine the perfect size of the garage door. Here are top 7 ways to determine the ideal size of a garage door.

Provide the Dimension and Design of the Garage Door to the Architect

garage door size

If you want to decide on the ideal garage door size then you must provide the architect or builder with an adequate amount of information. It will include the following things.

  • The dimensions of the garage.
  • Your preferred design.
  • The type and size of the vehicle that will be kept in the garage.
  • Whether it will be used by a single occupant or multiple users.

The advancement of digital technologies have made it easier to describe all this information with accuracy. You can use digital apps to draw and present your desired garage door.

Decide on the Placement of Windows for Determining the Garage Door Size

Garage door opener in use

Placement of windows can affect the garage door size as well as its appearance. If the garage door is smaller in size, placement of windows on its top section may look odd. For a better look, placing the windows in the second or the third section of the garage door will look better. Irrespective of the type and the size of the garage door, such construction can give the garage a trendy look. You can discuss with your architect on proper layout of the garage door to make it functional.

Choose the Size Customized to Meet Your Needs

Tan garage with big doors

As the end-user; you should choose a garage door that meets your requirement with perfection. This is important because besides fulfilling all traditional requirements, the garage door size should also meet the specific requirements you have. A perfect garage should have the following characteristics.

  • It will have enough space for stationing the vehicles you use.
  • The garage should also provide facilities for storing accessories for using the vehicles.
  • The size of the garage door is perfect for the hassle-free entrance to and exit from the garage.

Garage Door Should Be Replaced Or Modified Easily

There are numerous garage owners that start with a single vehicle, but get more with the passage of time. There are also others that replace their older automobiles with a new one. In either of these cases, the garage owner requires modifications and replacements of the garage and the garage doors.  Modifications or replacement of the doors is required to meet the change in the objects it is to house. The garage door size is vital for ensuring that the vehicles stationed in the garage can move in and out easily. That is why you should choose a garage door that can be modified or replaced easily and without causing any damage to the garage.

Know About The Ideal Garage Door Features

Motorcycle garage

As the task for you is to identify and buy the ideal garage door, it is necessary to know what the ideal one for you is. Learning the features include the size of the door, because it is a must have feature of a functional garage. An interesting feature is that people usually complain about smaller garages and not about an oversized garage. In case of any garage, the owner needs the garage door of ideal size.

Check for the Standard Garage Door Sizes

Table of Standard Door Sizes (in inches and metric)

Garage Door Type Height Width
Single Sectional 86.61 inches/2200mm 94.48 inches/2400mm
Double Sectional 86.61 inches/2200mm 196.85 inches/5000mm
Roller Door Up to 118.11 inches/Up to 3000mm Up to 208.66 inches/Up to 5300mm
Maximum Sectional Up to 133.85 inches/Up to 3400mm Up to 241.96 inches/Up to 6400mm
Tilt Door Up to 98.42 inches/Up to 2500mm Up to 216.53 inches/Up to 5500mm

You will come across a wide array of garage doors in the market. However; you should also learn about the standard garage door sizes. It will help you to make an informed decision on buying the right garage door. You can choose between the sectional, traditional, or tilt garage door among others. The standard sizes for garage doors are as follows.

  • 86.61 inches x 94.48 inches (2200 x 2400mm) of height and width for single sectional doors.
  • The dimensions for the double sectional door are 86.61 inches x 196.85 inches (2200 x 5000mm)

Obtain Expert Advice

Tan home with blue garage door

If you are unable to decide the size of the doors, then the best way would be obtaining expert advice. An expert will know how to go for it and will guide you properly. The above 7 ways are the best to decide on the appropriate garage door size for your garage.

Read more here – A Few Tips On Maintaining Your Tabletop Fire Bowl Throughout the Year

Exterior Garage Lights Guide: Lighting Tips and Tricks for Your Garage

Exterior Garage Lights Guide: Lighting Tips and Tricks for Your Garage

Intro

Exterior garage lights are not only practical, but they also enhance the aesthetic of your home. If you’ve noticed other people’s garage lights or have been shopping around a bit, you’ve probably come to realize that there are a myriad of ideas and styles available.

Exterior Garage Lights Guide

When choosing the best exterior garage lights for your house, you shouldn’t focus just on practicality. You should think about how the lights fit your home’s aesthetic, how they go with your family’s style, and how they elevate the overall look of your home. So, for this reason, your exterior garage lights need to be carefully hand-selected. No pressure!

This guide will offer the best exterior garage lighting tips and tricks and answer some frequently asked questions to help you choose the perfect exterior lights for your home! Get ready to be hit with inspiration!

Exterior Garage Lighting Tips and Tricks

1. Drive and shop around to get ideas

With so many options available, you probably shouldn’t go for the first ones you come across. To get ideas for possible outdoor lighting, you can drive around suburban neighborhoods to get inspired.

You can also visit any hardware store in-person or online to get some ideas of the various exterior garage lights available. You want to make sure you know everything available before you make your final decision.

2. Determine how many lights you need

Some may only need one exterior light for the center point above their garage. Some people prefer getting two for either side of the garage. A good starting point is to check your old lights and find ones to replace them. With this information, you’ll know if you just need one or two lights for the exterior of your home.

 3. Find the right size lights for your exterior

Depending on where you are installing your exterior lights, the sizing will be a little different. If you are installing your exterior lights on either side of your garage door, it should measure 1/3 to ¼ of the height of your garage door. If your light fixture is single, centered, and above your garage, you have to make sure you buy a size that will light up your entire driveway. This can only be determined once you measure the width of your driveway. So, be prepared with measurements before you make your final choice!

4. Opt for motion sensor lights

Motion sensor lights are the best bet for safety and convenience. These lights will turn on as soon as it senses movement on your driveway. If anyone in your home arrives home after sunset, it will conveniently turn on so that they have a lit-up pathway to the front door. It can also act as a warning if you live in a neighborhood that may be prone to burglary. Most unwanted visitors will get intimidated by lights that illuminate the driveway and back off!

5. Study and know the features you want

Exterior garage lights on white home

Not only are there so many sleek, traditional, and different styles of lights, there are also interesting features you can look for! Make sure to choose exterior lights for your garage that have all the features you and your family want.

Some features include LED, bulb size, dimming option, motion sensing, light direction, and timed lighting. Knowing which features are important and making an informed decision will give you the best results!

6. Choose lights that match your home’s aesthetic

Look at the outside of your home. Consider the colors, styles, patterns, and overall look. You want to choose lights that suit the aesthetic of your home. Your home is the first point of interaction between you and your guests. When they pull up into your driveway, you want to give them a burst of personality.

The exterior lights you choose should match the overall look of your house. But with so many light styles available on the market, it can be hard to find the perfect one for you. There are traditional lights, modern, or classic ones. Choose the lights that mesh well with the ambiance of your home and impress every passerby!

Things to Consider

Now that you’ve uncovered some tips and tricks, you are probably ready to dive in and start doing some research. But before you do, here are some things to consider before making your purchase!

Cost

Before any home project, the cost and budget should be determined. It’s important to note that there is an option out there for every reasonable budget. In the case of exterior garage lights, the cheapest options will also be the ones that will wear out the fastest. Keeping that in mind, the best ones that will last you years will probably cost you no less than $50.

Replacing your old exterior light fixture is typically a simple job. But if you have to install a junction box for any new fixtures, or you want to change the location of your lights from the center to either side of the garage, you may need to consider hiring a professional. Sure, there are quite a few videos on YouTube on how to install a junction box all by yourself, but you would need the right tools for the job, and that, too, will cost you.

The simplest and most cost-effective option will be to replace the old light fixtures you already have outside your home. All you would be buying is the replacement fixture.

Maintenance

Depending on the material of your light fixture, you might need to maintain it from time to time. Materials can be anything from plastic to aluminum to stainless steel to copper to brass or cast iron! Whatever material you choose will influence the price you buy it at.

Most light fixtures can be cleaned with a damp cloth to keep them from any dust or debris. Brass fixtures require polishing to keep them shiny and looking new. If you have copper or stainless steel, you can opt for spray cleaners that are intended for those particular materials. It will keep your fixture looking brand-new! Depending on the brand you buy, your warranty can range from 30 days to a lifetime. Consider this as well before making your final pick!

FAQs about Exterior Garage Lights

FAQs about Exterior Garage Lights

Q: How high should exterior garage lights be?

If you are installing your exterior garage lights on the sides of your garage, it should be about 5 ½ to 6 feet from the ground. For perfect results, the distance should typically be measured from the ground to the center of your light fixture.

If your exterior garage lights are going to be installed above your garage door, they should be about 6-12 inches centered and above your garage door.

Q: How do you put lights on the outside of a garage?

Every light fixture comes with an instruction booklet on how to assemble. It will also provide you with light fixture brackets to help with the installation. Read the instruction booklet provided to you by the manufacturer and follow the process to assemble and set up your exterior garage lights.

If you don’t have a junction box to install the fixture brackets, you may need to make your hole in the side of the house to insert a junction box. You can find YouTube tutorials on how to do a DIY junction box before inserting your light fixture brackets. Hopefully, you won’t have to do this step and will just replace your old exterior lights.

Q: How big should exterior garage light fixtures be?

When installing lights on either side of the garage, exterior garage light fixtures should be ¼ to 1/3 the size of the height of the garage door opening. If your fixture is centered and above your garage door, you need one large enough to light the range of your driveway. You can measure the width of your driveway and find a fixture that correlates. Most light fixtures provide an estimated range based on the bulb size.

Q: Are LED lights good for outdoor use?

The best choice for outdoor lighting is LED lights. They provide a brighter white light than traditional bulbs, and they have a longer life than their counterparts. Depending on how often it gets used, LEDs can last tens of thousands of hours!

Final Thoughts

Exterior garage lights are sought out for their practical uses. Many don’t realize the importance of exterior lights to their homes. If style and aesthetics don’t appeal to you too, then you can buy any light fixture and call it a day.

But if your home’s aesthetic holds a significant meaning to you, then you should consider choosing your exterior garage lights with care. These lights will give your home’s exterior a crucial look from the outside and brighten up your driveway during the night. More than practicality, you want to choose an exterior light that matches your personal style and matches the rest of your home.

In this guide, we offered tips and tricks to choose the best exterior garage lights for your home. Hopefully, it’s inspired you to find the best-looking and functional lights that suit your home and your family’s style. Happy hunting!

Read more here Porch Swing Cushion Care Guide

How To Build A Pole Barn Garage – Tips To Frame Garage Kit

How To Build A Pole Barn Garage – Tips To Frame Garage Kit

If you are looking for economic and easy ways to add shelter to your home, then pole barns are the right choice for you. This is the fastest and most cost-effective way to build a permanent or solid shelter, and the pole barn is mainly used to store equipment and house livestock and it even can function as a garage or workshop facility. No worries, the building of a pole barn is not a complicated process and it can be done in simple ways. Here, we have listed the process of how to build a pole barn garage.

Why do people use a pole barn garage?

Pole barn garages are getting hugely popular, as they don’t cost much. You even have various choices to reduce the cost of the building. You can also choose from low-cost materials to make construction easier. Also, the pole barn garage is the most eco-friendly option when compared to most other construction types.

If you want to implement this simple, effective, and affordable pole barn garage setup in your place, then here are the steps on how to build a pole barn garage.

How to build one

When compared to the other shed designs, the pole barn is the simplest construction. In the construction process, there will be a pole fixed in the ground and a secured top will above which will support the roof. Here is the process of building the pole barn garage

  • Measure the space

Before you start the construction process, it is important that you get an accurate measurement of the space. If you have the right measurement, then the number of supplies and unnecessary stress will be reduced.

If you are planning for a garage or storage, then you need a minimum of 8 feet. Try to choose an area that has good drainage, to avoid flooding in the rainy season.

  • Check the water and electric supply

Once you decided on the place and take the right measurements, then you need to check whether there is proper light and an electric supply. Also, make sure the place is free of shrubs and trees, so that it will be easy to build the pole barn.

  • Level the ground

The area you are working on should be on the same level so that it will be easy for you to work further. If you need any base rock for the construction, then you can add decomposed granite or a similar kind of gravel material.

  • Create the string line

Measuring out the Pole Barn Garage

Source: Pinterest.com

In this step, you will mark the outline of the building which you are making. This step will make the pole construction process easier and will also keep the structure in perspective, during the beginning stage of the construction. Put a small stake in each corner and then wrap a long piece of string between the stakes.

  • Dig holes

Holes for supports

Source: Pinterest.com

The process of digging the holes may differ depending on the height of the pole you want. But the minimum height of the pole will be 3 to 5 feet deep, and if you are looking for an open-sided pole barn then you should have ½ length of the ground.

You don’t need any foundation for the pole barn, but make sure the posts you have are stable and strong.

  • Mix the concrete

Depending on the size of each pole, you need to add 12 to 14 inches to the bottom of each hole. Make sure to tamp inside of each hole so that you will get a flat and sturdy surface, and in each hole drop the concrete for good stability.

  • Even the height of the poles

The height of the poles should be the same, if it is not then you have made a mistake in the size of the hole. To avoid this mistake, you can use a laser level to make sure the height of the poles are the same. Before you install the roof support beam, the height of the poles should be the same.

  • Add roof support beams

Support beams

Source: Pinterest.com

Adding the roof support beams is the first and most difficult step, as you need to cut notches to fit boards in each of the holes. The boards should be parallel to the ground and for stability, you can secure them with screw or lag bolts.

  • Build trusses

Trusses for garage

Source: Pinterest.com

The trusses are triangle-shaped roof beams and they should be placed width across the roof-supported beams. There will be a board that will run parallel to the ground and two added boards that will meet in the center.  You can choose at what angle to make your cuts.

  • Additional beam for support

To attach the siding with each other, you need to nail boards across the roof and between the poles. The number of boards you use will depend on the structure of the building, but make sure to add one additional board at each end of the section.

  • Add siding

The addition of a wall is not a difficult process, and you can even leave the side of the pole barn open. Take plywood and nail it to support boards along the outside edges of the building. If you want you can add wood siding, as it will look better.

  • Install roof

If you are adding a metal roof, then make sure to cut it into pieces so that it can easily fit. If you are planning for shingles, then you have to nail the plywood over the entire roof.

  • Add door or windows

Pole Barn Garage

Source: Pinterest.com

For extra support and framing, you can add doors, windows, and  can choose open-air or a window; which is the most common thing for a pole barn garage.

 

Bottom Line:

The pole barn garage is not only used for keeping your vehicles, but you can use the garage for various other purposes. If you are looking for a small and affordable place, then a pole barn will be the right choice to start. When compared to the other building barns, this pole barn is very useful for your property.

 

Also read:

A Step-By-Step Guide On How To Program Garage Door Opener

A Step-By-Step Guide On How To Program Garage Door Opener

A Step-By-Step Guide On How To Program Garage Door Opener

The garage door opener is one of the best investments to make, but you should know how to program a garage door opener. If you have a faulty garage door opener, then it will leave your entire house vulnerable. So, if you really want to learn, then you should have your garage door remote control and your car’s manual instructions to program the remote control of the door. So, in this article, you will learn a step-by-step guide on how to program a garage door opener in simple ways.

What is a garage door opener and how does it work?

The garage door is the largest moving part of the house and the most important thing is that it needs to work properly. If the garage door is not working properly, then you can’t enter or exit the home. If you are keeping your vehicle inside the garage and opening it often, then you must make sure that the garage door works properly.

Most times, the garage door gets some issues and you should know how to program garage door opener. The programming of the garage door is not a big deal; all you just do is follow the process in the right and proper way.

So, here are the steps given on how to program garage door opener in simple and easy ways.

How to program garage door opener

Most electric garage door work by the remote, and you can find different types of garage door openers. But the programming of the door opener follows the same concept, and here we have provided the instructions on how to program garage door opener pretty clearly.

Before we talk about how to program the garage door opener, there are two basic concepts that need to be followed for all kinds of garage door openers.

  • Cancel all old codes

how to program garage door opener

This step is for those who have lost the remote and wanted to delete all the detail stored in the garage door openers memory. If anyone takes your door opener, it will prevent them from opening it. This step will also make sure to cancel all the remotes which were used by the previous owners of the house.

You will find a panel behind the mission that comes with a button and in most cases, the button is called a “learn button”. Just hold this button for a few minutes and the information stored in the garage memory will automatically get deleted.

The time to hold the button usually varies but it will mostly range from 15 to 30 seconds. This will clear all the memories stored and also cancel the connection which is associated with the remote. In some models, you will find the LED button and once the memories got deleted, the LED light goes to off.

  • Connect a new remote

garage door opener remote

Once you are done with deleting the codes and canceling the connection of the old remote, now it’s time to make a new connection. Even if you don’t disconnect the old remote, but still want to add an additional remote, then you can follow the below-mentioned process on how to program garage door opener.

3 simple steps of programming garage door opener:

 

  1. Press the learn button

The “learn” button will be found at the back of the garage door opener which is mounted on the ceiling. Depending on the brand, the color and shape of the button will vary.

You need to single press the button, but the pressing should be firm and brief. If you hold the button in down, then it will erase all the stored details in the garage door opener. And again you have to re-program it, so it would be better if you press the button in the right place.

learn button

  1. Press and hold the remote’s button

The next step is to quickly press the button and hold it for a moment. If you have a built-in button then you need the help of someone in pressing it.

  1. Wait until it is done

The programming of the remote to the machine will take a few seconds, and if the machine accepts the code, then the light will flash for a brief moment. Also, you will hear an audible click.

That is all you are done with the programming of the garage door opener.

Reasons why your opener is not working:

Even after programming the garage door opener, still, if your garage door doesn’t open properly, then here are the common reasons to know why and tips to fix it.

  • The photo-eye is blocked

Most garage doors will have a photo eye that will make sure if a person or an object is blocking the way, that it won’t lower. You need to check if the cord attached to the eye is damaged and sometimes even dirt and dust can clog the eye and block the laser beam.

  • Powers source is disrupted

Before you start programming the garage door, make sure your power source is turned on. The garage door opener should be plugged into a working outlet, and you can even check the circuit breaker, fuse, or GFCI.

  • Cables have snapped or popped off

In certain cases, your cables may have disengaged. This will occur when a torsion spring breaks and the garage door cable gets snapped. This is the most serious problem as it will cause damage to your vehicle and wall, so you need to get the help of a professional immediately.

  • Adjust the limit setting

If the door closes, but pops up immediately then you need to adjust the settings. If the settings are off, then the door will hit the ground, so check the button on the motor to adjust the limit.

  • The door is off the track

Off track garage door

The door should smoothly run along the track and if it does not, then check if the track has any bends, obstacles, or bumps.

  • The remote control is malfunctioning

how to program garage door opener

Sometimes, your remote could also be one of the problems, as it could be in out of range, the antenna might get damaged and the signal gets blocked.

 

Also read:

A Complete Instruction Guide On Replacement Garage Door Springs