Modern times have made the garage useful for a variety of purposes, whether it is to park a car, to store things or it can even be turned into an additional room. So, whatever your plans may be, if you prefer drywall in a garage, then it would be worth your investment.
Drywall is considered to be a great addition to your garage and it is considered a great building material. The drywall in a garage is fire resistant, pest resistant, easy to install, and is also durable. It comes with a lot of advantages. In this article let’s discusses why you should consider drywall for your garage.
What exactly is drywall?
Drywall is the construction material that is used to finish walls and ceilings, and technically, drywall is nothing but sheets of treated gypsum. When gypsum is processed it becomes drywall, and then it can be used in the construction of modern buildings.
In earlier days, the walls and ceilings of many garages were covered by layers of messy platter on wooden strips, which is called a lathe. It is an expensive process and also looks extremely dirty on the wall, but the drywall in a garage is a cost-effective process.
There are lots of good things about drywall as it reduces the noise from outside, increases the lighting, and enhances the value of your home. So, the drywall for the garage is the best option to choose from.
Should I add drywall in a garage?
If you still think about why you need to consider drywall in a garage, then here are a few important things that you need to know;
- Makes the garage comfortable
The drywall is the best option for people living in colder countries, as the drywall can be installed over insulation which will keep your garage warm and also helps the pipes from freezing. In warmer countries, it prevents the hot air from coming in, so it is a comfortable option for all kinds of climates.
- Easy to add electrical outlets
Once you built your house, it would be a difficult task to add any extra wiring into your home. It will also look messy. If you have drywall you can easily add additional outlets and hide the wires inside the wall.
- Add value to your home
Many reports have been saying that adding drywall in a garage will increase the value of your home in the future, even though it doesn’t directly add value, still a well-made garage will make your house look unique from other houses.
How to install it?
If you are planning to install the drywall sheets all by yourself, then make sure you have some extra drywall sheets and enough drywall screws that will be required. You need to know the height of the garage wall and start installing from the top of the wall rather than starting in between.
Also, make sure to leave some space between the floor and drywall, or else any water on the floor will affect the drywall and cause some mold issues.
Arrange the drywall sheets
Most drywall sheets will come in 4 foot by 8 foot panels, so you can fix them horizontally or vertically, but if your wall is 10 foot by 20 foot, then you have make to some cuts. If you plan to hang the sheets horizontally, then go for narrower sheets, and make sure not to waste any sheets while you are cutting.
Hang the first drywall sheet
The first piece of drywall should be snug in the upper corner of the wall where it meets the ceiling, make sure not to make any mistake as every other sheet of drywall will depend on this. It should sit right next to the wall and ceiling.
Tighten them with drywall screws
Once the drywall is setup in the right place, tighten them using the drywall screws. There be no more gaps where the drywall pops out from the stud. Tighten the screw till they flush with the drywall sheet but not too deep.
In the same way, you need to arrange other drywall sheets and start with any that will be snug against the ceiling.
Cut the extra parts to make them fit
If you don’t have a perfectly fitted drywall sheet, then you may have to cut several parts to make them fit. Mark the top and bottom in the drywall sheet using a carpenter’s T-square and draw a light line to have a perfect cut.
Fill the large gaps
Once you are done with installing the drywall sheets, now it’s time to fill all the gaps. If the gap is small you can use paper tape, and for the big gaps, you definitely need a mesh.
Mud over the drywall screws
Once the mesh is kept in its place, you can stuff mud drywall into the gap through the mesh. Next let it dry overnight, so that it will hold the mesh tightly. You can even cover the drywall screws using this mud to have a nice smooth surface.
Tape the seams
After filling the huge gaps between the sheets, we now have to get this wall sealer up so that it will look pretty. This is a crucial step, if you mess your drywall up you’ll have more speed bumps. If your drywall is against the wall and you can see daylight, then it is a flat joint. On the other hand, if they don’t have any valleys between the sheets, then it is a butt joint. Once all the joints are taped and mudded, Allow them to sit overnight.
Sand and smooth
Finally, you can do the sanding and smoothing to get a flawless surface. Depending on the texture of the wall, you can go for skim coating before priming and painting.
Nowadays, people are investing more when it comes to the garage as they store their valuable things there and that is why the drywall in a garage is considered the best option. It adds protection, longevity, and appeal to your garage.
Read more here – 7 Ways to Determine the ideal garage door size